1″ Brass Aerated Spray Nozzle

1″ NPT Male-Threaded Brass Aerated Spray Nozzle, 2″ OD x 1-1/8″ ID.

This is an adjustable heavy nozzle.  If the water level increases above the level of the air intakes at the top, the nozzle will produce a taller, thinner pattern. The water stream has a white frothy look and is more wind-resistant. Level dependent nozzles include cascades, bubblers, geysers and most types of aerator nozzles.

• Here is our return policy if the nozzle you purchase does not work for your situation, and you need to return it within 30 days.
• There is a 25% re-stocking fee to return the parts though, so please review the sizing information below.

Pipe thread sizes do NOT refer to any physical dimension. The outside diameter of each nozzle must be measured and compared to Table 1.1 for correct size identification. For example, a 1/4” NPT nozzle has an outside thread diameter of 0.540”

• TABLE 1.1 How to Determine NPT (National Pipe Thread) Size

  NPT SIZE	THREAD OUTSIDE DIAMETER
  1/8″	0.405″
  1/4″	0.540″
  3/8″	0.675″
  1/2″	0.840″
  3/4″	1.050″
  1″	1.315″
  1-1/4″	1.660″
  1-1/2″	1.900″
  2″	2.375″
  2-1/2″	2.875″
  3″	3.500″
  4″	4.500″
  5″	5.563″